kala mistral 160cm laminator for industrial use in Germany

MEFU hot sale machie MF1700-M1 PRO is fully auto heat-assist laminator for most signage and graphics. The max lamination width of 1630mm/64″. High speed up to 9m/min. Equipped with precise cutters, will easy to cut the white edges with efficiency.

Max Laminating Width：1630mm
Max Laminating Thickness：23mm
Max Speed：Up to 12m/min
Max Temp：60°C/120°C
Rollers: Silicon(130mm diameter)
Pressure/Height Adjust:Hand crank
Heated Method：Infrared
Preheating Time：5-10 min
Power Input：1400W/2200W
KW/H：0.5-0.8
Volt：110/220V，50/60HZ
Emergency Button:2
Foot-pedal: Yes
Laser Eye:Yes

The best seller MF1700-C3 with new designing and functions provides unbeaten performance. This super machine can run up to 20m/min with a wide range of medias. Suitable for business that are looking to build in extra capacity and more versatility.

Its new upgraded panel with Speed, Temperature and Lamination statistics display provides clear and easier operation.

The best seller MF1700-C3 with new designing and functions provides unbeaten performance. This super machine can run up to 20m/min with a wide range of medias. Suitable for business that are looking to build in extra capacity and more versatility.

Its new upgraded panel with Speed, Temperature and Lamination statistics display provides clear and easier operation.

The basic level B5 is a brand new cold laminator, equipped with Pneumatic lifting which ensures more even pressure and easier operate compare to the traditional manual machine.
Pneumatic lifting roller、Manual running、130mm Silicon roller、Two lamination rolls

The semi-auto MF1700-F1 can satisfy most possibilities that under 1630mm/64’’. It is really an inexpensive option for the applications that needs heated up to 120℃.
Stronger frame, large diameter silicon rollers, steadily pressure system etc, provide more accurate operation than ever. Safety with Laser eye and emergency buttons provide 2 levels of protection for operators.

Cold lamination has a better lamination effect under low-temperature conditions, so we will properly heat the laminating film (below 60°C) to ensure the laminating effect. However, if the heating is excessive or the temperature is not uniform, bubbles will be generated.

LF1700-D4 pneumatic lift heat-assist roll laminator with new ABS cover. This entry level automatic machine that can handle demanding jobs, its performance surpass the requirements of Printers and Finishers offers outstanding lamination service within a reasonable budget. Vertical cutting system is available in optional.

With the new control panels you can easily check Speed, Temperature and Lamination statistics.

MEFU industrial laminator, MF1700-F2 is perfect for most applications of sign and graphic. The Dual-heated rollers with max temperature of 120C offers the possibility not only for laminating but also for mounting and encapsulating up to 1630mm.

Additionally, its fully adjustable tungsten blades can cut most materials with a lifetime that over 15000m.

The simple MF1700-B5 PRO has pneumatic lifting system that can generate even pressure of rollers. With electrical running and rewinds ensure this laminating machine Roll-to-Roll capacity. Due to its 130mm silicon rollers, the operator will get a fancy finishes even without heating function.