large format industrial laminator with laser cutting in Germany

MEFU hot sale machie MF1700-M1 PRO is fully auto heat-assist laminator for most signage and graphics. The max lamination width of 1630mm/64″. High speed up to 9m/min. Equipped with precise cutters, will easy to cut the white edges with efficiency.

MF1600-B7 is a 1.53m/60in manual laminator with penumatic lift. Its simple design makes it extremely easy to use and provides quality laminating results.

1.
Smart Entry System
Easy to check speed, temperature, and Lamination statistics.

2.
Auto-locked exchangeable shaft
Upgraded shaft caps and holders can be easily locked and loaded medias. Anti-static string.

3.
Precise vertical cutters
Fully adjust the position, its tungsten blades have a lifetime over 15000m.

4.
Rear control panel
Easier for speed adjust and cutter active.

MF1700-M1 PRO is fully auto heat-assist laminator for signage and graphics. This premium machine’s vertical cutting system can cut the wasted edges with efficiency during lamination. Pneumatic up and down, Top speed 12m/min, you got everything here.

MEFU best seller MF1700-C3 with new designing and functions provides unbeaten performance. This super machine can run up to 20m/min with a wide range of medias. Suitable for business that are looking to build in extra capacity and more versatility. Its new upgraded panel with Speed, Temperature and Lamination statistics display provides clear and easier operation.

The basic level B5 is a brand new cold laminator, equipped with Pneumatic lifting which ensures more even pressure and easier operate compare to the traditional manual machine.

The semi-auto LF1700-F1 can satisfy most possibilities that under 1630mm/64’’. It is really an inexpensive option for the applications that needs heated up to 120℃.

Stronger frame, large diameter silicon rollers, steadily pressure system etc, provide more accurate operation than ever. Safety with Laser eye and emergency buttons provide 2 levels of protection for operators.

Cold lamination has a better lamination effect under low-temperature conditions, so we will properly heat the laminating film (below 60°C) to ensure the laminating effect. However, if the heating is excessive or the temperature is not uniform, bubbles will be generated.