manual cold laminator with pneumatic lifting in Malaysia

MEFU hot sale machie MF1700-M1 PRO is fully auto heat-assist laminator for most signage and graphics. The max lamination width of 1630mm/64″. High speed up to 9m/min. Equipped with precise cutters, will easy to cut the white edges with efficiency.

MEFU’s unique SMART system for checking temperature and speed display and recording. Spin-in and spin-out air shafts and a speed of 50m/min make it the most powerful machine ever built.

1.
New Entry Smart System
Easy to check temperature, speed and lamination statistics
2.
Roll shaft
Auto-locked exchangeable roll shafts,Easy for rolls loading and unloading.
3.
Hand crank
Its hand crank provides easy and smooth experience of nip-gap and pressure adjustment
4.
120mm silicon rollers
Ensure even pressure of both sides and make good finishing.

The new generation of LF1700-F5 offers unbeaten performances as an entry level laminator. 1.63m/64’’ wide can satisfy most application needs. This heat-assist machine is really a good helper for pressure sensitive adhesive lamination with air bubble free. 2 levels of protection ensures operator works in complete safety. Meanwhile, patent self-locking roll-shafts provides time saving while loading medias. The numerous features included makes application easy and safe.

The basic level B5 is a brand new cold laminator, equipped with Pneumatic lifting which ensures more even pressure and easier operate compare to the traditional manual machine.

1.
Pneumatic lifting
Pneumatic lifting silicone roller
Pressure equalization
2.
Premium 120mm silicon rollers
Ensure even pressure of both sides and make good finishing
3.
Two holders as standard
Easy for loading and unloading materials
4.
Classic hand crank
High quality plastic casting handle
Durable and firm

MEFU industrial laminator, the fully adjustable tungsten blades of MF1700-F2 can cut most materials with a lifetime that over 15000m.
Additionally, the Dual-heated rollers with max temperature of 120C offers the possibility not only for laminating but also for mounting and encapsulating up to 1630mm.
MF1700-F2 is perfect for most applications of sign and graphic.

The semi-auto LF1700-F1 can satisfy most possibilities that under 1630mm/64’’. It is really an inexpensive option for the applications that needs heated up to 120℃. Stronger frame, large diameter silicon rollers, steadily pressure system etc, provide more accurate operation than ever.

MF1700-M1 PRO is fully auto heat-assist laminator for signage and graphics. This premium machine’s vertical cutting system can cut the wasted edges with efficiency during lamination. Pneumatic up and down, Top speed 12m/min, you got everything here.