manual laminator for 1500mm width KT board

MEFU hot sale machie MF1700-M1 PRO is fully auto heat-assist laminator for most signage and graphics. The max lamination width of 1630mm/64″. High speed up to 9m/min. Equipped with precise cutters, will easy to cut the white edges with efficiency.

MF1600-B7 is a 1.53m/60in manual laminator with penumatic lift. Its simple design makes it extremely easy to use and provides quality laminating results.

The semi-auto LF1700-F1 can satisfy most possibilities that under 1630mm/64’’. It is really an inexpensive option for the applications that needs heated up to 120℃.

Stronger frame, large diameter silicon rollers, steadily pressure system etc, provide more accurate operation than ever. Safety with Laser eye and emergency buttons provide 2 levels of protection for operators.

The industrial laminating and cutting machine MF1700-F3 shows MEFU latest technology, its fully function SMART PRO system provides various possibilities for customers with unbeaten performance.

You can operate the machine with our unique SMART PRO system, such as lamination statistics, height & pressure adjustment, overloading alarming device, makes it the most powerful machine ever. Its incredible speed of 50m/min can finish one roll within 1 min together with the laser tracking vertical cutting.

The semi-auto MF1700-F1 can satisfy most possibilities that under 1630mm/64’’. It is really an inexpensive option for the applications that needs heated up to 120℃.

Stronger frame, large diameter silicon rollers, steadily pressure system etc, provide more accurate operation than ever. Safety with Laser eye and emergency buttons provide 2 levels of protection for operators.

The best seller MF1700-C3 with new designing and functions provides unbeaten performance. This super machine can run up to 20m/min with a wide range of medias. Suitable for business that are looking to build in extra capacity and more versatility. Its new upgraded panel with Speed, Temperature and Lamination statistics display provides clear and easier operation.

1.
Smart Entry System
Easy to check speed, temperature, and Lamination statistics.
2.
Vertical cutting function
Fully adjust the position, its safety tungsten blades can be applied over 15000m with sharp cutting.
3.
Auto-locked exchangeable shaft
Upgraded shaft caps and holders can be easily locked and loaded medias.
4.
Rear control panel
Rear control unit to supervise the lamination at the first beginning.

The simple MF1700-B5 PRO has pneumatic lifting system that can generate even pressure of rollers. With electrical running and rewinds ensure this laminating machine Roll-to-Roll capacity. Due to its 130mm silicon rollers, the operator will get a fancy finishes even without heating function.

new designing and functions provides unbeaten performance. This super machine can run up to 20m/min with a wide range of medias. Suitable for business that are looking to build in extra capacity and more versatility.